UNDERGROUNG WATER PIPE LEAKAGE SYSTEM

AUTHOR(S)

Chandru K S, Hema Raja Shri P K, Brindhavani C

DOI: https://doi.org/10.46647/ijetms.2023.v07i02.050

ABSTRACT
Water supply and leak detection are the Water Supply Board's two main issues. the enormous volume of water that is lost owing to leaks when domestic water is supplied through pipelines. The majority of water lost due to pipeline leaks occurs underground, making it difficult to locate leaks in the pipeline system. Around 4000 drops, or one litre, of water were lost in the pipeline during a typical leak.This project's primary goal is to use the Internet of Things to identify water leaks in subterranean pipelines and track the water level in water tanks in smart cities (IOT). The system's purpose is to keep an eye on and find water leaks when water is distributed through underground pipelines in smart cities. The system will keep an eye on things, look for water leaks, and notify the appropriate person if one happens. The suggested system consists of three key components: monitoring the water pressure level in pipes, monitoring the water level in overhead tanks, and sending an alarm message to the user and Water Board when a pipeline leak occurs. The flow sensors built into the pipes collect information on pipeline discharge. A microcontroller named Arduino Uno processes the data gathered by sensors. Finally, cloud computing is used to monitor the processed data online.
Page No: 416 - 422

References:

Gopalakrishnan P. Abhishek S.Ranjith R. Venkatesh R and Jai Suriya V (2017), “Smart pipeline water leakage detection system, International Journal Of Applied Engineering Research, Vol. 12, pp 5559 - 5564 .

Hegde Adarsh, Gopi Kiran T S , Deepthi D ,T N Nagabhushan, S P Shiva Prakashy and Anand

Raj SUlley (2016), “Automated water flow control system”, National Conference on Product Design, July, pp. 1 – 9.

Hossain Mohammad Zakir (2015) “Water: the most precious resource of our life”, Global Journal of Advanced Research, September, Vol. 2, Issue 9, pp 1436 – 1445.

Kulkarni Pranita Vijaykumar and M. S. Joshi (2016), “An IOT based water supply monitoring and controlling system with theft identification”, International Journal of Innovative Research in Science, Engineering and Technology, September ,Vol. 5, Issue 9, pp 16152 - 16157 .

Mohammed Shahanas.K and Bhagavathi Sivakumar P (2016), “Framework for a smart water management system in the context of smart city initiatives in India”, proceeding of 2nd International Conference on Intelligent Computing, Communication & Convergence, 2016, pp 142 - 147.

Praba A (2016), “IoT of Civil Infrastructures”, International Journal of Research in Advanced Technology, June, Vol. 1, Issue 6, pp. 6-9.

Rahmat R F, Satria I S, Siregar B and Budiarto R (2017), “Water pipeline monitoring and leak detection using flow liquid metre sensor”, IAES International Conference on Electrical Engineering, Computer Science and Informatics, 2017, pp 1 -6 .

Reddy Swetha, K.V.Chanakya, B.Eswari, Bhupati (2018), “Water leakage detection monitoring and controlling system using IOT”, International Journal of Engineering and Technology, pp 120 - 123.

Sadeghioon Ali M, Nicole Metje, David N. Chapman and Carl J. Anthony (2014), “Smart Pipes: smart wireless sensor networks for leak detection in water pipelines”, Journal Of Sensor and Actuator Networks, 2014, pp 64 - 78.

Santucci Gerald (2009), “The Internet of Things: Between the Revolution of the Internet and the Metamorphosis of Objects”, Publication

Saraswathi V, Rohit A, Sakthivel and Sandheep T J (2018), “Water leakage system using IoT”,

International Journal of Innovative Research in Engineering & Management, Vol. 5, Issue 2, pp 67 - 69.

Sethi Pallavi and Sarangi. R Smruti (2017), “Internet of Things: Architectures, Protocols, and Applications”, Journal of Electrical and Computer Engineering, Volume 2017, Article ID 9324035.

Singh Omvir and Turkiya Sushila (2013), “A survey of household domestic water consumption patterns in rural semi- aridvillage, India”, GeoJournal-Spatially Integrated Social Sciences and Humanities, October, Vol. 5, pp 777 – 790.

Wagan Farhan Hussain and Khoso Salim (2013), "Water shortage; its causes, impacts and remedial measures",Proceedings of 6th International Civil Engineering Congress, At Karachi, Pakistan,December.

Shwetasaibal Samanta Sahoo; Mousime Xalxo; B G Mukunda. "A Study on Tourist Behaviour Towards Sustainable Tourism in Karnataka". International Research Journal on Advanced Science Hub, 2, 5, 2020, 27-33. doi: 10.47392/irjash.2020.28

Muniyandy Elangovan; Mohamed Yousuf; Mohamed Nauman; Mohammed Nayeem. "Design and Development of Delivery Robot for Commercial Purpose". International Research Journal on Advanced Science Hub, 4, 07, 2022, 192-197. doi: 10.47392/irjash.2022.047

Manikandan N; Swaminathan G; Dinesh J; Manish Kumar S; Kishore T; Vignesh R. "Significant Attention in Industry and Academia for Wire Arc Additive Manufacturing (WAAM) - A Review". International Research Journal on Advanced Science Hub, 4, 07, 2022, 198-204. doi: 10.47392/irjash.2022.048

Shoeb Ahmed Syed; Steve Ales; Rajesh Kumar Behera; Kamalakanta Muduli. "Challenges, Opportunities and Analysis of the Machining Characteristics in hybrid Aluminium Composites (Al6061-SiC-Al2O3 ) Produced by Stir Casting Method". International Research Journal on Advanced Science Hub, 4, 08, 2022, 205-216. doi: 10.47392/irjash.2022.051

Ashima Saxena; Preeti Chawla. "A Study on the Role of Demographic Variables on Online Payment in Delhi NCR". International Research Journal on Advanced Science Hub, 4, 08, 2022, 217-221. doi: 10.47392/irjash.2022.052

Vishnupriya S; Nirsandh Ganesan; Ms. Piriyanga; Kiruthiga Devi. "Introducing Fuzzy Logic for Software Reliability Admeasurement". International Research Journal on Advanced Science Hub, 4, 09, 2022, 222-226. doi: 10.47392/irjash.2022.056

GANESAN M; Mahesh G; Baskar N. "An user friendly Scheme of Numerical Representation for Music Chords". International Research Journal on Advanced Science Hub, 4, 09, 2022, 227-236. doi: 10.47392/irjash.2022.057

Nirsandh Ganesan; Nithya Sri Chandrasekar; Ms. Gokila; Ms. Varsha. "Decision Model Based Reliability Prediction Framework". International Research Journal on Advanced Science Hub, 4, 10, 2022, 236-242. doi: 10.47392/irjash.2022.061

Vishnupriya S; Nithya Sri Chandrasekar; Nirsandh Ganesan; Ms. Mithilaa; Ms. Jeyashree. "Comprehensive Analysis of Power and Handloom Market Failures and Potential Regrowth Options". International Research Journal on Advanced Science Hub, 4, 10, 2022, 243-250. doi: 10.47392/irjash.2022.062

Minh Duc Ly; Que Nguyen Kieu Viet. "Improvement Productivity and Quality by Using Lean Six Sigma: A Case Study in Mechanical Manufacturing". International Research Journal on Advanced Science Hub, 4, 11, 2022, 251-266. doi: 10.47392/irjash.2022.066

Ragunath A; Poonam Syal. "Net Zero Energy Buildings Initiatives - A Review". International Research Journal on Advanced Science Hub, 4, 11, 2022, 267-271. doi: 10.47392/irjash.2022.067

Suresh P; Justin Jayaraj K; Aravintha Prasad VC; Abishek Velavan; Mr Gokulnath. "Deep Learning for Covid-19 Identification: A Comparative Analysis". International Research Journal on Advanced Science Hub, 4, 11, 2022, 272-280. doi: 10.47392/irjash.2022.068

Chirag H B; Darshan M; Rakesh M D; Priyanka D S; Manjunath Aradya. "Prediction of Concrete Compressive Strength Using Artificial Neural Network". International Research Journal on Advanced Science Hub, 4, 11, 2022, 281-287. doi: 10.47392/irjash.2022.069

Minh Ly Duc; Que Nguyen Kieu Viet. "Analysis Affect Factors of Smart Meter A PLS-SEM Neural Network". International Research Journal on Advanced Science Hub, 4, 12, 2022, 288-301. doi: 10.47392/irjash.2022.071

Lely Novia; Muhammad Basri Wello. "Analysis of Interpersonal Skill Learning Outcomes in Business English Students Class". International Research Journal on Advanced Science Hub, 4, 12, 2022, 302-305. doi: 10.47392/irjash.2022.072

Ms. Nikita; Sandeep Kumar; Prabhakar Agarwal; Manisha Bharti. "Comparison of multi-class motor imagery classification methods for EEG signals". International Research Journal on Advanced Science Hub, 4, 12, 2022, 306-311. doi: 10.47392/irjash.2022.073

Aniket Manash; Ratan Kumar; Rakesh Kumar; Pandey S C; Saurabh Kumar. "Elastic properties of ferrite nanomaterials: A compilation and a review". International Research Journal on Advanced Science Hub, 4, 12, 2022, 312-317. doi: 10.47392/irjash.2022.074

Prabin Kumar; Rahul Kumar; Ragul Kumar; Vivek Rai; Aniket Manash. "A Review on coating of steel with nanocomposite for industrial applications". International Research Journal on Advanced Science Hub, 4, 12, 2022, 318-323. doi: 10.47392/irjash.2022.075

Twinkle Beniwal; Vidhu K. Mathur. "Cloud Kitchens and its impact on the restaurant industry". International Research Journal on Advanced Science Hub, 4, 12, 2022, 324-335. doi: 10.47392/irjash.2022.076

T. Pravin, C. Somu, R. Rajavel, M. Subramanian, P. Prince Reynold, Integrated Taguchi cum grey relational experimental analysis technique (GREAT) for optimization and material characterization of FSP surface composites on AA6061 aluminium alloys, Materials Today: Proceedings,Volume 33, Part 8, 2020, Pages 5156-5161, ISSN 2214-7853. doi.org/10.1016/j.matpr.2020.02.863.

R. Ranjith, C. Somu, G. Tharanitharan, Venkatajalapathi.T, Naveenkumar M, Integrated Taguchi cum Grey Relational Experimental Analysis (GREAT) for Optimization and Machining Characterization of Cryogenic Cooled AA6063 Aluminium Alloys, Materials Today: Proceedings, Volume 18, Part 7, 2019,Pages 3597- 605, https://doi.org/10.1016/j.matpr.2019.07. 291.

R. Devi Priya, R. Sivaraj, Ajith Abraham, T. Pravin, P. Sivasankar and N. Anitha. "Multi-Objective Particle Swarm Optimization Based Preprocessing of Multi-Class Extremely Imbalanced Datasets". International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems Vol. 30, No. 05, pp. 735-755 (2022). Doi: 10.1142/S0218488522500209

M. S. N. K. Nijamudeen, G. Muthuarasu, G. Gokulkumar, A. Nagarjunan, and T. Pravin, “Investigation on mechanical properties of aluminium with copper and silicon carbide using powder metallurgy technique,” Advances in Natural and Applied Sciences, vol. 11, no. 4, pp. 277–280, 2017.

Pravin T, M. Subramanian, R. Ranjith,Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining, “Journal of the Indian Chemical Society”, Volume 99, Issue 10, 2022, 100705, ISSN 0019-4522, Doi: 10.1016/j.jics.2022.100705

V.S. Rajashekhar; T. Pravin; K. Thiruppathi , “Control of a snake robot with 3R joint mechanism”, International Journal of Mechanisms and Robotic Systems (IJMRS), Vol. 4, No. 3, 2018. Doi: 10.1504/IJMRS.2018.10017186

T. Pravin, M. Sadhasivam, and S. Raghuraman, “Optimization of process parameters of Al-10% Cu compacts through powder metallurgy,” Applied Mechanics and Materials, vol. 813-814, pp. 603–607, 2010.

Rajashekhar, V., Pravin, T., Thiruppathi, K.: A review on droplet deposition manufacturing-a rapid prototyping technique. Int. J. Manuf. Technol. Manage. 33(5), 362–383 (2019) https://doi.org/10.1504/IJMTM.2019.103277

Rajashekhar V S, Pravin T, Thirupathi K, Raghuraman S.Modeling and Simulation of Gravity based Zig-zag Material Handling System for Transferring Materials in Multi Floor Industries. Indian Journal of Science and Technology.2015 Sep, 8(22), pp.1-6.

How to Cite This Article:
Chandru K S, Hema Raja Shri P K, Brindhavani C . UNDERGROUNG WATER PIPE LEAKAGE SYSTEM . ijetms;7(2):416-422. DOI: 10.46647/ijetms.2023.v07i02.050