ONE PASS PACKET STEERING IN SOFTWARE DEFINED DATA CENTERS
AUTHOR(S)
R.Sudhakar, V.Ramkumar, S.Santhosh, J.Suganth, D.Thirunavukkarasu
DOI: https://doi.org/10.46647/ijetms.2023.v07i02.057
ABSTRACT
Issue of service function chaining in a network is the focus of this paper. Currently, middle box placement in a network and packet steering through middle boxes are the two main problems associated with chaining services in a network—also known as service function chaining. We propose a One Pass Packet Steering (OPPS) method for use in multi-subscriber environments with the goal of reducing the total amount of time it takes for Users and Services to connect. We show a proof of idea execution utilizing imitations performed with Mininet. According to our findings, the end-to-end delay of subscribers utilizing different sets of policy chains with the same middle boxes and a fixed topology remains roughly the same. Software-Defined Networking, or SDN for short, is a new way of networking that gives a controller and its applications the all-powerful ability to see the whole network and program it in any way they want. This makes it possible for new innovations in network protocols and applications. SDN's logically centralized control plane, which gives visibility to the entire network and is used by many SDN applications, is one of its main benefits. We propose new SDN-specific attack vectors that seriously challenge this foundation, a first in the literature. While the spirit of our new attacks is somewhat similar to that of spoofing attacks in legacy networks, such as the ARP poisoning attack, there are significant differences in how unique vulnerabilities are exploited and how current SDN differs from legacy networks.
Page No: 494 - 501
References:
1. Y. Yiakoumis et al., “Putting home users in charge of their network,” in Proc. ACM UbiComp, Sep. 2012, pp. 1114–1119.
2. Y. Yiakoumis, K. Yap, S. Katti, G. Parulkar, and N. McKeown, “Slicing home networks,” in Proc. SIGCOMM HomeNets Workshop, Aug. 2011, pp. 1–6.
3. J. Matias, E. Jacob, N. Katti, and J. Astorga, “Towards neutrality in access networks: A NANDO deployment with OpenFlow,” in Proc. Int. Conf. Access Netw., Jun. 2011, pp. 7–12.
4. A.Kumar et al., “BwE: Flexible, hierarchical bandwidth allocation for WAN distributed computing,” in Proc. ACM SIGCOMM, Aug. 2015, pp. 1–14.
5. C.Joe-Wong, S. Ha, and M. Chiang, “Time-dependent broadband pricing: Feasibility and benefits,” in Proc. IEEE ICDCS, Jun. 2011, pp. 288–298.
6. P. Danphitsanuphan, “Dynamic bandwidth shaping algorithm for Internet traffic sharing environments,” in Proc. World Congr. Eng., Jul. 2011, pp. 1–4.
7. NikolaosLaoutaris, Michael Sirivianos, Xiaoyuan Yang, and Pablo Rodriguez “Inter-Datacenter Bulk Transfers with NetStitcher”Telefonica Research Barcelona, Spain nikos@tid.es, irivi@tid.es, yxiao@tid.s, pablorr@tid.es
8. A.Mahimkar et al., “Bandwidth on demand for inter-data center communication,” in Proc. ACM HotNets Workshop, Nov. 2011, Art. no. 24.
9. R. K. P. Mok, E. W. W. Chan, and R. K. C. Chang, “Measuring the quality of experience of HTTP video streaming,” in Proc. IFIP/IEEE Int. Symp. Integr. Netw. Manage., May 2011, pp. 485–492.
10. H. H. Gharakheili, A. Vishwanath, and V. Sivaraman, “Pricing usersanctioned dynamic fast-lanes driven by content providers,” in Proc. IEEE INFOCOM Workshop Smart Data Pricing (SDP), Apr. 2015, pp. 528–533.
11. S. Sundaresan et al., “Broadband Internet performance: A view from the gateway,” in Proc. ACM SIGCOMM, Aug. 2011, pp. 134–145.
12. V. Sivaraman, T. Moors, H. H. Gharakheili, D. Ong, J. Matthews, and C. Russell, “Virtualizing the access network via open APIs,” in Proc. ACM ConNEXT, Dec. 2013, pp. 31–42.
13. Kok-Kiong Yap Te-Yuan Huang Ben Dodson Monica S. Lam Nick McKeown “Towards Software-Friendly Networks”Stanford University {yapkke,huangty,bjdodson,lam,nickm}@stanford.edu
14. Barbara van Schewick “Network Neutrality: What A Non-Discrimination Rule Should Look Like” Work presented at the 38th Research Conference on Communication, Information and Internet Policy (TPRC 2010) October 1 - October 3, 2010, Arlington, VA.
15. Erik Nordstr¨om, David Shue, PremGopalan, Robert Kiefer MatveyArye, Steven Y. Ko, Jennifer Rexford, Michael J. Freedman “Serval: An End-Host Stack for Service-Centric Networking”Princeton University.
16. Shwetasaibal Samanta Sahoo; Mousime Xalxo; B G Mukunda. "A Study on Tourist Behaviour Towards Sustainable Tourism in Karnataka". International Research Journal on Advanced Science Hub, 2, 5, 2020, 27-33. doi: 10.47392/irjash.2020.28
17. Muniyandy Elangovan; Mohamed Yousuf; Mohamed Nauman; Mohammed Nayeem. "Design and Development of Delivery Robot for Commercial Purpose". International Research Journal on Advanced Science Hub, 4, 07, 2022, 192-197. doi: 10.47392/irjash.2022.047
18. Manikandan N; Swaminathan G; Dinesh J; Manish Kumar S; Kishore T; Vignesh R. "Significant Attention in Industry and Academia for Wire Arc Additive Manufacturing (WAAM) - A Review". International Research Journal on Advanced Science Hub, 4, 07, 2022, 198-204. doi: 10.47392/irjash.2022.048
19. Shoeb Ahmed Syed; Steve Ales; Rajesh Kumar Behera; Kamalakanta Muduli. "Challenges, Opportunities and Analysis of the Machining Characteristics in hybrid Aluminium Composites (Al6061-SiC-Al2O3 ) Produced by Stir Casting Method". International Research Journal on Advanced Science Hub, 4, 08, 2022, 205-216. doi: 10.47392/irjash.2022.051
20. Ashima Saxena; Preeti Chawla. "A Study on the Role of Demographic Variables on Online Payment in Delhi NCR". International Research Journal on Advanced Science Hub, 4, 08, 2022, 217-221. doi: 10.47392/irjash.2022.052
21. Vishnupriya S; Nirsandh Ganesan; Ms. Piriyanga; Kiruthiga Devi. "Introducing Fuzzy Logic for Software Reliability Admeasurement". International Research Journal on Advanced Science Hub, 4, 09, 2022, 222-226. doi: 10.47392/irjash.2022.056
22. GANESAN M; Mahesh G; Baskar N. "An user friendly Scheme of Numerical Representation for Music Chords". International Research Journal on Advanced Science Hub, 4, 09, 2022, 227-236. doi: 10.47392/irjash.2022.057
23. Nirsandh Ganesan; Nithya Sri Chandrasekar; Ms. Gokila; Ms. Varsha. "Decision Model Based Reliability Prediction Framework". International Research Journal on Advanced Science Hub, 4, 10, 2022, 236-242. doi: 10.47392/irjash.2022.061
24. Vishnupriya S; Nithya Sri Chandrasekar; Nirsandh Ganesan; Ms. Mithilaa; Ms. Jeyashree. "Comprehensive Analysis of Power and Handloom Market Failures and Potential Regrowth Options". International Research Journal on Advanced Science Hub, 4, 10, 2022, 243-250. doi: 10.47392/irjash.2022.062
25. Minh Duc Ly; Que Nguyen Kieu Viet. "Improvement Productivity and Quality by Using Lean Six Sigma: A Case Study in Mechanical Manufacturing". International Research Journal on Advanced Science Hub, 4, 11, 2022, 251-266. doi: 10.47392/irjash.2022.066
26. Ragunath A; Poonam Syal. "Net Zero Energy Buildings Initiatives - A Review". International Research Journal on Advanced Science Hub, 4, 11, 2022, 267-271. doi: 10.47392/irjash.2022.067
27. Suresh P; Justin Jayaraj K; Aravintha Prasad VC; Abishek Velavan; Mr Gokulnath. "Deep Learning for Covid-19 Identification: A Comparative Analysis". International Research Journal on Advanced Science Hub, 4, 11, 2022, 272-280. doi: 10.47392/irjash.2022.068
28. Chirag H B; Darshan M; Rakesh M D; Priyanka D S; Manjunath Aradya. "Prediction of Concrete Compressive Strength Using Artificial Neural Network". International Research Journal on Advanced Science Hub, 4, 11, 2022, 281-287. doi: 10.47392/irjash.2022.069
29. Minh Ly Duc; Que Nguyen Kieu Viet. "Analysis Affect Factors of Smart Meter A PLS-SEM Neural Network". International Research Journal on Advanced Science Hub, 4, 12, 2022, 288-301. doi: 10.47392/irjash.2022.071
30. Lely Novia; Muhammad Basri Wello. "Analysis of Interpersonal Skill Learning Outcomes in Business English Students Class". International Research Journal on Advanced Science Hub, 4, 12, 2022, 302-305. doi: 10.47392/irjash.2022.072
31. Ms. Nikita; Sandeep Kumar; Prabhakar Agarwal; Manisha Bharti. "Comparison of multi-class motor imagery classification methods for EEG signals". International Research Journal on Advanced Science Hub, 4, 12, 2022, 306-311. doi: 10.47392/irjash.2022.073
32. Aniket Manash; Ratan Kumar; Rakesh Kumar; Pandey S C; Saurabh Kumar. "Elastic properties of ferrite nanomaterials: A compilation and a review". International Research Journal on Advanced Science Hub, 4, 12, 2022, 312-317. doi: 10.47392/irjash.2022.074
33. Prabin Kumar; Rahul Kumar; Ragul Kumar; Vivek Rai; Aniket Manash. "A Review on coating of steel with nanocomposite for industrial applications". International Research Journal on Advanced Science Hub, 4, 12, 2022, 318-323. doi: 10.47392/irjash.2022.075
34. Twinkle Beniwal; Vidhu K. Mathur. "Cloud Kitchens and its impact on the restaurant industry". International Research Journal on Advanced Science Hub, 4, 12, 2022, 324-335. doi: 10.47392/irjash.2022.076
35. T. Pravin, C. Somu, R. Rajavel, M. Subramanian, P. Prince Reynold, Integrated Taguchi cum grey relational experimental analysis technique (GREAT) for optimization and material characterization of FSP surface composites on AA6061 aluminium alloys, Materials Today: Proceedings,Volume 33, Part 8, 2020, Pages 5156-5161, ISSN 2214-7853. doi.org/10.1016/j.matpr.2020.02.863.
36. R. Ranjith, C. Somu, G. Tharanitharan, Venkatajalapathi.T, Naveenkumar M, Integrated Taguchi cum Grey Relational Experimental Analysis (GREAT) for Optimization and Machining Characterization of Cryogenic Cooled AA6063 Aluminium Alloys, Materials Today: Proceedings, Volume 18, Part 7, 2019,Pages 3597- 605, https://doi.org/10.1016/j.matpr.2019.07. 291.
37. R. Devi Priya, R. Sivaraj, Ajith Abraham, T. Pravin, P. Sivasankar and N. Anitha. "Multi-Objective Particle Swarm Optimization Based Preprocessing of Multi-Class Extremely Imbalanced Datasets". International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems Vol. 30, No. 05, pp. 735-755 (2022). Doi: 10.1142/S0218488522500209
38. M. S. N. K. Nijamudeen, G. Muthuarasu, G. Gokulkumar, A. Nagarjunan, and T. Pravin, “Investigation on mechanical properties of aluminium with copper and silicon carbide using powder metallurgy technique,” Advances in Natural and Applied Sciences, vol. 11, no. 4, pp. 277–280, 2017.
39. Pravin T, M. Subramanian, R. Ranjith,Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining, “Journal of the Indian Chemical Society”, Volume 99, Issue 10, 2022, 100705, ISSN 0019-4522, Doi: 10.1016/j.jics.2022.100705
40. V.S. Rajashekhar; T. Pravin; K. Thiruppathi , “Control of a snake robot with 3R joint mechanism”, International Journal of Mechanisms and Robotic Systems (IJMRS), Vol. 4, No. 3, 2018. Doi: 10.1504/IJMRS.2018.10017186
41. T. Pravin, M. Sadhasivam, and S. Raghuraman, “Optimization of process parameters of Al-10% Cu compacts through powder metallurgy,” Applied Mechanics and Materials, vol. 813-814, pp. 603–607, 2010.
42. Rajashekhar, V., Pravin, T., Thiruppathi, K.: A review on droplet deposition manufacturing-a rapid prototyping technique. Int. J. Manuf. Technol. Manage. 33(5), 362–383 (2019) https://doi.org/10.1504/IJMTM.2019.103277
43. Rajashekhar V S, Pravin T, Thirupathi K, Raghuraman S.Modeling and Simulation of Gravity based Zig-zag Material Handling System for Transferring Materials in Multi Floor Industries. Indian Journal of Science and Technology.2015 Sep, 8(22), pp.1-6.
How to Cite This Article:
R.Sudhakar, V.Ramkumar, S.Santhosh, J.Suganth, D.Thirunavukkarasu
. ONE PASS PACKET STEERING IN SOFTWARE DEFINED DATA CENTERS
. ijetms;7(2):494-501. DOI: 10.46647/ijetms.2023.v07i02.057
