Design & Fabrication of Quad Processing Machine

AUTHOR(S)

Karthi V, Arun G, Dinesh Kumar M, Eshwar M, Ajith S

DOI: https://doi.org/10.46647/ijetms.2023.v07i03.024

ABSTRACT
In this project, the quad processing machine for cutting, shaping, grinding and drilling machines is kept to be in same attachment. This eliminates the risk of material handling and to the machine table. This unit is driven by 0.25 H.P. three phase motor of 1440 rpm. This is linked with the cast-iron (CI) slider. This enables the slide to get the rotation movement into reciprocating motion having a stroke length of 75mm. The head of the slotting can be tilted to be getting the shaping machine at a desired angle. The head is welded to the slider at the bottom edge. In this machine there can be one operation will be done which is slotting or shaping operation. In the tool head, a slot & tapped holes are provided for holding the tool. According to the height of the job the head can be moved up or down by means of column and can be fixed using a clamp provided. If a table with a machine vice having longitudinal moment is attached to the machine, the setup can be used for machining slots and shaper in small jobs like pulleys etc. Instead of MS sheet, if CI is used for body and other parts it will have longer life, less friction, better lubrication and the production cost will also be low. This machine can also be used for production of small washers by punching if suitable dies and brake arrangement are fixed.

Page No: 182 - 187

References:

1. Vo Ngoc Mai Anh; Hoang Kim Ngoc Anh; Vo Nhat Huy; Huynh Gia Huy; Minh Ly. "Improve Productivity and Quality Using Lean Six Sigma: A Case Study". International Research Journal on Advanced Science Hub, 5, 03, 2023, 71-83. doi: 10.47392/irjash.2023.016
2. R. Devi Priya, R. Sivaraj, Ajith Abraham, T. Pravin, P. Sivasankar and N. Anitha. "MultiObjective Particle Swarm Optimization Based Preprocessing of Multi-Class Extremely Imbalanced Datasets". International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems Vol. 30, No. 05, pp. 735-755 (2022). Doi: 10.1142/S0218488522500209
3. Swathi Buragadda; Siva Kalyani Pendum V P; Dulla Krishna Kavya; Shaik Shaheda Khanam. "Multi Disease Classification System Based on Symptoms using The Blended Approach". International Research Journal on Advanced Science Hub, 5, 03, 2023, 84-90. doi: 10.47392/irjash.2023.017
4. Susanta Saha; Sohini Mondal. "An in-depth analysis of the Entertainment Preferences before and after Covid-19 among Engineering Students of West Bengal". International Research Journal on Advanced Science Hub, 5, 03, 2023, 91-102. doi: 10.47392/irjash.2023.018
5. Ayush Kumar Bar; Avijit Kumar Chaudhuri. "Emotica.AI - A Customer feedback system using AI". International Research Journal on Advanced Science Hub, 5, 03, 2023, 103-110. doi: 10.47392/irjash.2023.019
6. Rajarshi Samaddar; Aikyam Ghosh; Sounak Dey Sarkar; Mainak Das; Avijit Chakrabarty. "IoT & Cloud-based Smart Attendance Management System using RFID". International Research Journal on Advanced Science Hub, 5, 03, 2023, 111-118. doi: 10.47392/irjash.2023.020
7. Minh Ly Duc; Que Nguyen Kieu Viet. "Analysis Affect Factors of Smart Meter A PLS-SEM Neural Network". International Research Journal on Advanced Science Hub, 4, 12, 2022, 288-301. doi: 10.47392/irjash.2022.071
8. Lely Novia; Muhammad Basri Wello. "Analysis of Interpersonal Skill Learning Outcomes in Business English Students Class". International Research Journal on Advanced Science Hub, 4, 12, 2022, 302-305. doi: 10.47392/irjash.2022.072
9. Ms. Nikita; Sandeep Kumar; Prabhakar Agarwal; Manisha Bharti. "Comparison of multi-class motor imagery classification methods for EEG signals". International Research Journal on Advanced Science Hub, 4, 12, 2022, 306-311. doi: 10.47392/irjash.2022.073
10. Aniket Manash; Ratan Kumar; Rakesh Kumar; Pandey S C; Saurabh Kumar. "Elastic properties of ferrite nanomaterials: A compilation and a review". International Research Journal on Advanced Science Hub, 4, 12, 2022, 312-317. doi: 10.47392/irjash.2022.074
11. Prabin Kumar; Rahul Kumar; Ragul Kumar; Vivek Rai; Aniket Manash. "A Review on coating of steel with nanocomposite for industrial applications". International Research Journal on Advanced Science Hub, 4, 12, 2022, 318-323. doi: 10.47392/irjash.2022.075
12. Twinkle Beniwal; Vidhu K. Mathur. "Cloud Kitchens and its impact on the restaurant industry". International Research Journal on Advanced Science Hub, 4, 12, 2022, 324-335. doi: 10.47392/irjash.2022.076
13. V.S. Rajashekhar; T. Pravin; K. Thiruppathi , “Control of a snake robot with 3R joint mechanism”, International Journal of Mechanisms and Robotic Systems (IJMRS), Vol. 4, No. 3, 2018. Doi: 10.1504/IJMRS.2018.10017186
14. T. Pravin, C. Somu, R. Rajavel, M. Subramanian, P. Prince Reynold, Integrated Taguchi cum grey relational experimental analysis technique (GREAT) for optimization and material characterization of FSP surface composites on AA6061 aluminium alloys, Materials Today: Proceedings, Volume 33, Part 8, 2020, Pages 5156-5161, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.02.863.
15. Pravin T, M. Subramanian, R. Ranjith,Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining, “Journal of the Indian Chemical Society”, Volume 99, Issue 10, 2022, 100705, ISSN 0019-4522, Doi: 10.1016/j.jics.2022.100705
16. M. S. N. K. Nijamudeen, G. Muthuarasu, G. Gokulkumar, A. Nagarjunan, and T. Pravin, “Investigation on mechanical properties of aluminium with copper and silicon carbide using powder metallurgy technique,” Advances in Natural and Applied Sciences, vol. 11, no. 4, pp. 277–280, 2017.
17. T. Pravin, M. Sadhasivam, and S. Raghuraman, “Optimization of process parameters of Al10% Cu compacts through powder metallurgy,” Applied Mechanics and Materials, vol. 813-814, pp. 603–607, 2010.
18. Rajashekhar, V., Pravin, T., Thiruppathi, K.: A review on droplet deposition manufacturing a rapid prototyping technique. Int. J. Manuf. Technol. Manage. 33(5), 362–383 (2019) https://doi.org/10.1504/IJMTM.2019.103277
19. Rajashekhar V S, Pravin T, Thirupathi K, Raghuraman S.Modeling and Simulation of Gravity based Zig-zag Material Handling System for Transferring Materials in Multi Floor Industries. Indian Journal of Science and Technology.2015 Sep, 8(22), pp.1-6.
20. Shoeb Ahmed Syed; Steve Ales; Rajesh Kumar Behera; Kamalakanta Muduli. "Challenges, Opportunities and Analysis of the Machining Characteristics in hybrid Aluminium Composites (Al6061-SiC-Al2O3 ) Produced by Stir Casting Method". International Research Journal on Advanced Science Hub, 4, 08, 2022, 205-216. doi: 10.47392/irjash.2022.051
21. Nirsandh Ganesan; Nithya Sri Chandrasekar; Ms. Gokila; Ms. Varsha. "Decision Model Based Reliability Prediction Framework". International Research Journal on Advanced Science Hub, 4, 10, 2022, 236-242. doi: 10.47392/irjash.2022.061
22. Vishnupriya S; Nithya Sri Chandrasekar; Nirsandh Ganesan; Ms. Mithilaa; Ms. Jeyashree. "Comprehensive Analysis of Power and Handloom Market Failures and Potential Regrowth Options". International Research Journal on Advanced Science Hub, 4, 10, 2022, 243-250. doi: 10.47392/irjash.2022.062
23. Ashima Saxena; Preeti Chawla. "A Study on the Role of Demographic Variables on Online Payment in Delhi NCR". International Research Journal on Advanced Science Hub, 4, 08, 2022, 217-221. doi: 10.47392/irjash.2022.052
24. Vishnupriya S; Nirsandh Ganesan; Ms. Piriyanga; Kiruthiga Devi. "Introducing Fuzzy Logic for Software Reliability Admeasurement". International Research Journal on Advanced Science Hub, 4, 09, 2022, 222-226. doi: 10.47392/irjash.2022.056
25. GANESAN M; Mahesh G; Baskar N. "An user friendly Scheme of Numerical Representation for Music Chords". International Research Journal on Advanced Science Hub, 4, 09, 2022, 227-236. doi: 10.47392/irjash.2022.057
26. Kakali Sarkar; Abhishek Kumar; Sharad Chandra Pandey; Saurabh Kumar; Vivek Kumar. "Tailoring the structural, optical, and dielectric properties of nanocrystalline niobate ceramics for possible electronic application". International Research Journal on Advanced Science Hub, 5, 01, 2023, 1-7. doi: 10.47392/irjash.2023.001
27. Pavan A C; Somashekara M T. "An Overview on Research Trends, Challenges, Applications and Future Direction in Digital Image Watermarking". International Research Journal on Advanced Science Hub, 5, 01, 2023, 8-14. doi: 10.47392/irjash.2023.002
28. Pavan A C; Lakshmi S; M.T. Somashekara. "An Improved Method for Reconstruction and Enhancing Dark Images based on CLAHE". International Research Journal on Advanced Science Hub, 5, 02, 2023, 40-46. doi: 10.47392/irjash.2023.011
29. Subha S; Sathiaseelan J G R. "The Enhanced Anomaly Deduction Techniques for Detecting Redundant Data in IoT". International Research Journal on Advanced Science Hub, 5, 02, 2023, 47-54. doi: 10.47392/irjash.2023.012
30. Nguyen Kieu Viet Que; Nguyen Thi Mai Huong; Huynh Tam Hai; Vo Dang Nhat Huy; Le Dang Quynh Nhu; Minh Duc Ly. "Implement Industrial 4.0 into process improvement: A Case Study in Zero Defect Manufacturing". International Research Journal on Advanced Science Hub, 5, 02, 2023, 55-70. doi: 10.47392/irjash.2023.013
31. Gyanendra Kumar Pal; Sanjeev Gangwar. "Discovery of Approaches by Various Machine learning Ensemble Model and Features Selection Method in Critical Heart Disease Diagnosis". International Research Journal on Advanced Science Hub, 5, 01, 2022, 15-21. doi: 10.47392/irjash.2023.003
32. Nirsandh Ganesan; Nithya Sri Chandrasekar; Ms. Piriyanga; Keerthana P; Mithilaa S; Ms. Jeyashree. "Effect of Nano Reinforcements Tio2 And Y2O3 on Aluminium Metal Matrix Nanocomposite". International Research Journal on Advanced Science Hub, 5, 01, 2023, 22-32. doi: 10.47392/irjash.2023.004
33. Nur Aeni; Lely Novia; Mr. Muhalim; Nur Fitri. "Incorporating Secret Door in Teaching Vocabulary for EFL Vocational Secondary School Students in Indonesia". International Research Journal on Advanced Science Hub, 5, 01, 2023, 33-39. doi: 10.47392/irjash.2023.005

How to Cite This Article:
Karthi V, Arun G, Dinesh Kumar M, Eshwar M, Ajith S .Design & Fabrication of Quad Processing Machine . ijetms;7(3):182-187. DOI: 10.46647/ijetms.2023.v07i03.024