Tire Quality Inspection System Based on Deep Learning

AUTHOR(S)

Kiruthikaa R, Pon Saravanan R, Samyuktha R, Swathi P, Vinush S

DOI: https://doi.org/10.46647/ijetms.2023.v07i04.022

ABSTRACT
There have been many reports of accidents caused by the use of damaged and worn tires, and these accidents are more common on highways and during the rainy season. Although this is a common problem, many people cannot distinguish good tires from worn ones, increasing the risk of ending up with good tires on the road. A few years ago, the main technology for checking tire size was manual inspection. An important method is to determine the grade of the tread pattern bed by checking the depth and the shoulder pattern bed. Tires are one of the most important parts of a vehicle as they actively support driving. However, they often disagree when it comes to proper inspection and maintenance. Most of the time, the general public apparently does not care about their tires. Many will experience tooth wear and flank damage, and failure to follow up on these problems will cause long-term damage. However, this method is too expensive to use in a family car. This article presents a model used as a running image that can distinguish broken tires from rubbing tires. The model is based on the image displayed outside the user-supplied tire and determines its status after comparing it with the model data using the deep learning algorithm ResNet50. This model is made to remind you that it can be used in addition to equipment suitable for use in real life applications. With regulation by regulatory agencies, tire accidents can be reduced and damage to people and property on public roads can be prevented.
Page No: 143 - 148

References:

Dr. A Albert Raj. et., al. “CNN based Tire Life Prediction and Defect Identification System” in 2021,6th International Conference on Communication and Electronics Systems (ICCES), 978-1-6654-3587.

S.M. Mynul Karim. et. ,al. “Tire Wear Detection for Accident Avoidance Employing Convolutional Neural Networks” in 2021,8th NAFOSTED Conference on Information and Computer Science (NICS), 978-1-6654- 1001-4.

Pravin T, M. Subramanian, R. Ranjith, Clarifying the phenomenon of Ultrasonic Assisted Electric discharge machining, “Journal of the Indian Chemical Society”, Volume 99, Issue 10, 2022, 100705, ISSN 0019-4522, Doi: 10.1016/j.jics.2022.100705

R. Devi Priya, R. Sivaraj, Ajith Abraham, T. Pravin, P. Sivasankar and N. Anitha. "MultiObjective Particle Swarm Optimization Based Preprocessing of Multi-Class Extremely Imbalanced Datasets". International Journal of Uncertainty, Fuzziness and Knowledge-Based Systems Vol. 30, No. 05, pp. 735-755 (2022). Doi: 10.1142/S0218488522500209

T. Pravin, C. Somu, R. Rajavel, M. Subramanian, P. Prince Reynold, Integrated Taguchi cum grey relational experimental analysis technique (GREAT) for optimization and material characterization of FSP surface composites on AA6061 aluminium alloys, Materials Today: Proceedings, Volume 33, Part 8, 2020, Pages 5156-5161, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.02.863.

Rajashekhar, V., Pravin, T., Thiruppathi, K.: A review on droplet deposition manufacturing a rapid prototyping technique. Int. J. Manuf. Technol. Manage. 33(5), 362–383 (2019) https://doi.org/10.1504/IJMTM.2019.103277

V.S. Rajashekhar; T. Pravin; K. Thiruppathi , “Control of a snake robot with 3R joint mechanism”, International Journal of Mechanisms and Robotic Systems (IJMRS), Vol. 4, No. 3, 2018. Doi: 10.1504/IJMRS.2018.10017186

Vo Ngoc Mai Anh; Hoang Kim Ngoc Anh; Vo Nhat Huy; Huynh Gia Huy; Minh Ly. "Improve Productivity and Quality Using Lean Six Sigma: A Case Study". International Research Journal on Advanced Science Hub, 5, 03, 2023, 71-83. doi: 10.47392/irjash.2023.016

Swathi Buragadda; Siva Kalyani Pendum V P; Dulla Krishna Kavya; Shaik Shaheda Khanam. "Multi Disease Classification System Based on Symptoms using The Blended Approach". International Research Journal on Advanced Science Hub, 5, 03, 2023, 84-90. doi: 10.47392/irjash.2023.017

Susanta Saha; Sohini Mondal. "An in-depth analysis of the Entertainment Preferences before and after Covid-19 among Engineering Students of West Bengal". International Research Journal on Advanced Science Hub, 5, 03, 2023, 91-102. doi: 10.47392/irjash.2023.018

Ayush Kumar Bar; Avijit Kumar Chaudhuri. "Emotica.AI - A Customer feedback system using AI". International Research Journal on Advanced Science Hub, 5, 03, 2023, 103-110. doi: 10.47392/irjash.2023.019

Rajarshi Samaddar; Aikyam Ghosh; Sounak Dey Sarkar; Mainak Das; Avijit Chakrabarty. "IoT & Cloud-based Smart Attendance Management System using RFID". International Research Journal on Advanced Science Hub, 5, 03, 2023, 111-118. doi: 10.47392/irjash.2023.020

Xiaoping Wang. et., al. “Artificial Neural Network-Based Method for Identifying Under-Inflated Tire in Indirect TPMS” in 2020,IEEE Access, Volume B, 213799- 213805.

Harshal Bhanare. et., al. “Quality Inspection of Tire using Deep Learning based Computer Vision” in 2019, International Research Journal of Engineering and Technology(IRJET),Volume: 06 Issue: 11,3555-3559.

Orhan Bulan. et. ,al. “Tire Classification from Still Images and Video” in 2012,15th International IEEE Conference, 485-490.

How to Cite This Article:
Kiruthikaa R, Pon Saravanan R, Samyuktha R, Swathi P, Vinush S . ijetms;7(4):143-148. DOI: 10.46647/ijetms.2023.v07i04.022