Design and Manufacturing of Robotic Arm for Industrial Applications

AUTHOR(S)

Prof. C. C. Jadhav, Mr. Ruturaj Kale, Mr. Abhijit Kukade, Mr. Gaurav Khandalkar, Mr. Sandip Ingale, Mr. Rohan Bhandare

DOI: https://doi.org/10.46647/ijetms.2023.v07i04.032

ABSTRACT
Design and Development of Automation of Loading and Unloading to machine fixture” This Setup involves the use of automation solution to reduce operator fatigue and increase efficiency. Industries in the recent day concentrating on CNC machineries for mass production by replacing conventional lathes to improve productivity, but loading and unloading of job carried over by manual, However Present work, machine tool manufacturer are coming with solutions including automatic loading and unloading to reduce the fatigue of labour and reduce cycle time and increasing productivity. Productivity Improvement on a Production by Automatic Loading and Unloading of Component includes analysis and detailed study of manufacturing process including loading and unloading methods of components on a machine. Present work aims at improving the productivity of components on a CNC Fixture. Here emphasis is placed upon improving the existing time-consuming methods.

Page No: 235 - 243

References:

1. R.Anandhan, P.Gunasekaran, D.Sreenevasan, D.Rajamaruthu, “Design and Fabrication of Angular Drilling Machine”, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 5, Special Issue 8, May 2016.
2. Ajay Kumar Singh, Nishant Moona, “Design of a Universal Micro Radial Drilling Machine”, International Journal of Science Technology & Engineering, Volume 2, Issue 09, March 2016 ISSN (online): 2349-784X.
3. G. Niranjan, A. Chandini, P. Mamatha, “Automated Drilling Machine withDepth Controllability”, International Journal of Science and Engineering Applications Volume 2 Issue 4, 2013, ISSN-2319-7560 (Online).  
4. Industrial and Service Robots, IFR International Federation of Robotics, 2010.
5. R. J. Wang, J. W. Zhang, et al., “The Multiple-Function Intelligent Robotic Arms,” FUZZ-IEEE Journal, Korea, 20-24 August 2009, pp. 1995-2000.
6. B. Siciliano, L. Sciavicco, L. Villani and G. Oriolo, “Robotics, Modelling, Planning and Control,” Springer, London, 2009.  
7. Case Studies and Profitability of Robot Investment, The IFR Statistical Department, 2008.
8. L. B. Duc, M. Syaifuddin, et al., “Designing 8 Degrees of Freedom Humanoid Robotic Arm,” International Conference on Intelligent and Advanced Systems, Kuala Lumpur, 25-28 November 2007, pp. 1069-1074.
9. C. R. Carignan, G. G. Gefke and B. J. Roberts, “Intro to Space Mission Design: Space Robotics,” Seminar of Space Robotics, University of Maryland, Baltimore, 26 March 2002.
10. Occupational Safety and Health Administration Technical Manual, OSHA 3167, United States Department of Labor, 1970.
11. M. P. Groover and M. Weiss, “Robotica Industrial, Technologia, Programacion y Aplicaciones,” Mc-Graw Hills, Mexico D.F., 1989.     
12. Mr. Jay M. Patel, Mr. Akhil P. Nair, Prof. Hiral U.Chauhan, “ 3-Directional Flexible Drilling Machine”, International Journal for Scientific Research & Development, Vol. 3, Issue 01, 201,  ISSN (online): 23210613.
13. Manipulating Industrial Robots—Vocabulary, International Organization for Standardization Standard 8373, 1994.



How to Cite This Article:
Prof. C. C. Jadhav, Mr. Ruturaj Kale, Mr. Abhijit Kukade, Mr. Gaurav Khandalkar, Mr. Sandip Ingale, Mr. Rohan Bhandare . Design and Manufacturing of Robotic Arm for Industrial Applications . ijetms;7(4):235-243. DOI: 10.46647/ijetms.2023.v07i04.032