Runner Optimization Of Hpdc Coolant Pump Housing Component Through Flow Analysis
AUTHOR(S)
Sudeep I, Shashank S, Dr.R. Nagaraja
DOI: https://doi.org/10.46647/ijetms.2023.v07i05.009
ABSTRACT
Die casting is an age-old process where molten metal is poured into a cavity containing the impression of the desire output to get a casted component as the final results. This process when done with the help of casting machines, involves additional process parameters such as injection pressure, clamping force, etc. An integral part of this process is also the runner design which delivers the molten metal from the barrel of the machine to the cavity of the mould. Two variations of runner design are implemented into the coolant pump housing component. The first design is a simple vertical shot runner design with sub-runners at 2 local regions. The second design is tilted shot runner design with gating points at 4 local regions. The fill time for the component is calculated based on an industrial thumb rule. Once the design and calculation is complete, the component shots are put through flow simulation and the obtained results are compared with each other and the manual calculations.
Page No: 74 - 80
References:
[1] B. Vijaya Ramnath, C.Elanchezhian, Vishal Chandrasekhar, A. Arun Kumar, S. Analysis and Optimization of Gating System for Commutator End bracket 3rd International Conference on Materials Processing and
[2] Mohan.R, Padmanabhan Design and Development of a High Pressure Die Casting Technique for Manufacturing Heavy Vehicle Engine Components Advanced Materials Research Vols. 984-985 (2014) pp 641-647 © (2014) Trans Tech Publications, Switzerland.
[3] M D Ibrahim, M R A Rahman, A A Khan , M R Mohamad, M S Z M Suffian, Y S Yunos, L K Wong, and M Z Mohtar Effect of mold designs on molten metal behaviour in high-pressure die casting Fifteenth Asian Congress of Fluid Mechanics (15ACFM) IOP Conf. Series: Journal of Physics: Conf. Series 822 (2017) 012029.
[4] N. Moscovitch, G. Gertsberg, N. Nagar, M. Lautzker, N.Fantetti and B. Bronfin The effect of porosity on the microstructure and mechanical properties of die cast Mg alloys 2006 Society of Automotive Engineers, Inc.
[5] Cleary, P., Ha, J., Alguine, V., Nguyen, T., 2002. Flow modelling in casting processes. Applied Mathematical Modelling 26, 171–190.
[6] Avalle, M., Belingardi, G., Cavatorta, M.P., Doglione, R., 2002. Casting defects and fatigue strength of a die cast aluminium alloy: a comparison between standard specimens and production components. International Journal of Fatigue 24, 1–9.
[7] PETI Ferencz, GRAMA Lucian, SOLOVĂSTRU Ioan, CORBA Cristian STUDIES CONCERNING THE DESIGN OF THE RUNNER, GATE AND VENTING SYSTEMS IN THE CASE OF THE HIGH PRESSURE DIE CASTING TECHNOLOGY, SC CIEMATRICON SA, Tirgu-Mures; University of “Petru Maior” Tirgu-Mures, Technological and Managerial Engineering Department, SC CIE R&D ROM SRL, Tirgu-Mures; University of Oradea, Romania.
[8] DIE CASTING by H.H DOEHLER, Doehler-Jarvis corporation. McGrawl-hill book company New York Toronto London.
[9] Fundamentals of die casting by Genick Bar-eir, 7449 North Wastenaw Ave (version 0.1.4 – November 27,2012)
[10] Metals Handbook. Casting, vol. 15, 9th edition, ASM Ohio: International, Metals Park, 1988:294–295.
[11] ASM internationals, Properties and selection of non-ferrous alloys and special purpose materials.
[12].Shubham Agarwal; Nishant Moghe; Vaishali Wadhe. "Big Data Analytics for Supply Chain Optimization: A Review of Methodologies and Applications". International Research Journal on Advanced Science Hub, 5, 07, 2023, 215-221. doi: 10.47392/irjash.2023.046
[13].Hanumanthappa S; Guruprakash C D. "Feature Extraction from Brain MR Images for Detecting Brain Tumor using Deep Learning Techniques". International Research Journal on Advanced Science Hub, 5, 07, 2023, 242-247. doi: 10.47392/irjash.2023.049
[14].Shakti Punj; Lavkush Sharma; Brajesh Kumar Singh. "Enhancing Face Mask Detection Using Convolutional Neural Networks: A Comparative Study". International Research Journal on Advanced Science Hub, 5, 08, 2023, 280-289. doi: 10.47392/irjash.2023.054
[15].Sirajudeen S; Sudha S. "A Review - Smoke-Fire Detection and YOLO (You Only Look Once)". International Research Journal on Advanced Science Hub, 5, 08, 2023, 248-256. doi: 10.47392/irjash.2023.051
[16].Mr. Buddesab; Nanda Ashwin; Shruthi M; Rekha P; Pavan Mulgund. "Real time eye based Password Authentication by Eye Blinking System". International Research Journal on Advanced Science Hub, 5, Issue 05S, 2023, 1-6. doi: 10.47392/irjash.2023.S001
[17].Rekha P; Mr. Buddesab; Shruthi K; Sathya M; Nanda Ashwin. "Tabib : Chatbot for Healthcare Automation with Audio Assistance using Artificial Intelligence". International Research Journal on Advanced Science Hub, 5, Issue 05S, 2023, 7-14. doi: 10.47392/irjash.2023.S002
[18].Krishnan S; Pranay Varma; Aravind J; Indra Gandhi K. "Analysis of Supervised and Unsupervised Deep Learning Approaches for Identifying and Localizing Image Forgeries". International Research Journal on Advanced Science Hub, 5, Issue 05S, 2023, 15-25. doi: 10.47392/irjash.2023.S003
How to Cite This Article:
Sudeep I, Shashank S, Dr.R. Nagaraja
. Runner Optimization Of Hpdc Coolant Pump Housing Component Through Flow Analysis
. ijetms;7(5):74-80. DOI: 10.46647/ijetms.2023.v07i05.009
