LEAF SPRING EYE THICKNESS OPTIMIZATION USING SOLID WORKS AND ANSYS PERFORMANCE ANALYSIS

AUTHOR(S)

Rajasri Bandi, Dr.P.Snehalatha

DOI: https://doi.org/10.46647/ijetms.2023.v07i03.006

ABSTRACT
“Comparison Analysis of Leaf Spring with Eye Thickness of 18mm and 17mm Using Solid works, and Performance Analysis Using ANSYS ˮ was the subject of a study. The specific load and Unladen load were used to compare the eye thicknesses of 17 mm and 18 mm. The leaf springs in the vehicles make the passengers more comfortable by reducing vertical vibration caused by the unevenness of the road geometry. When a spring loses its shape over time, the life of the spring decreases, which can cause the weight distribution on four wheels to change and make it difficult to handle. The cause of leaf spring failure is truck driving conditions such as braking, cornering, and path hole striking, which will exert tensional forces on the spring. Designing a suitable eye with increased thickness for a leaf spring can increase the life, and Static Structural analysis is performed to understand the life of the Steel leaf spring

Page No: 44 - 54

References:

[1] Design And Analysis Of Leaf Spring By Using Composite Material For Light Vehicles
[2] Design Optimization And Fea Analysis Of 3d Printed Carbon Peek Based Mono Leaf Spring
[3] Fabrication Of Hybrid Composite Materials Leaf Spring Ekhlas Edan Kader,Rania Adwan, Lutfi Yousuf Zedan Mechanical      Engineering Department, University Of Diyala, Baqubah, Diyala, Iraq *Corresponding Author Email:Ekhlasedan_Eng@Uodiyala.Edu.Iq
[4] Experimental Study And Optimization Of Leaf Spring
  [5]Design And Analysis Of Glass Fiber Reinforced Polymer (Gfrp) Leaf Spring B.B.Deshmukh 1*, Dr.S.B.Jaju 2 1 Student, Iv Semester M. Tech (Cad/Cam) E-Mail: Bhushan.Deshmukh03@Gmail.Com 2 Professor E-Mail: Sbjaju@Gmail.Com 1*,2 Mechanical Engineering Department, G. H. Raisoni College Of Engineering, Nagpur. 440016 (India)
  [6] Failure Assessment Of A Leaf Spring Eye Design Under Various Load Cases Y.S. Kong A , S. Abdullah A,B, M.Z. Omar A,B,⁎, S.M. Haris A,B A Department Of Mechanical And Materials Engineering, Faculty Of Engineering And Built Environment, UniversitiKebangsaan Malaysia, 43600 UkmBangi, Selangor Darul Ehsan, Malaysia B Centre For Automotive Research, Faculty Of Engineering And Built Environment, UniversitiKebangsaan Malaysia, 43600 UkmBangi, Selangor, Malaysia
[7] Leaf Spring Analysis With Eyes Using FeaB.Mahesh Babu 1 , D.Muralidhar Yadav2 , N.Ramanaiah3 1assistant Professor, Dr.Samuel George Institute Of Engineering & Technology, Markapur. 2 Associate Professor, Dr.Samuel George Institute Of Engineering & Technology, Markapur. 3assistant Professor, A1 Global Engineering & Technology, Markapur.
[8] Static Analysis Of Leaf Spring G Harinath Gowd1* Associate Professor, Department Of Mechanical Engineering Sri Krishnadevaraya Engineering College, Nh-7, Gooty, Anantapur Dist, Pin 515 401 Andhra Pradesh., India Hari.Skd@Gmail.Com E Venugopal Goud Associate Professor, Department Of Mechanical Engineering Pullareddy Engineering College, Kurnool, Anantapur Dist, Pin 515 401 Andhra Pradesh., India Venugoud@Gmail.Com 1* Corresponding Author, Email: Hari.Skd@Gmail.Com.
[9] A Comparative Study Of Cae And Experimental Results Of Leaf Springs In Automotive Vehicles Article  In  International Journal Of Engineering Science And Technology · September 2011
  [10] Static And Modal Analysis Of Leaf Spring With Eyes Using Fea Packages Y.Venu1 , G.Diwakar2 1 Pg Student, Department Of Mechanical Engineering, Pvp Siddhartha Institution Of Technology, Kanuru 2 Associate Prof, Department Of Mechanical Engineering, Pvp Siddhartha Institution Of Technology, Kanuru, Vijayawada, Ap, Indi
[11]Leaf springs – Design, calculation and testing requirements AthanassiosMihailidisAristotle University ThessalonikiS. KarditsasG. SavaidisA. Savaidis.S. Karditsas, G. Savaidis, A. Mihailidis Aristotle University of Thessaloniki Thessaloniki, Greece A. SavaidisSchool of Pedagogical and Technological Education Athens, Greec
[12]Analysis Of Steel And Composite Leafspring 1shanmuga Srinivas Theru, Mechanical Engineering Department & N.B.K.R.Is     2sk.Mansoor, Mechanical Engineering Department & N.B.K.R Ist Prof, P.Hazarthaiah, Mechanical Engineering Department & N.B.K.R Ist
[13]Eye Design Analysis Of Single Leaf Spring In Automotive Vehicles Using Cae Tools *vinkel Arora1 , Gian Bhushan2 And M.l. Aggarwal3
[14]Linear Static Structure Analysis Of Military Eye And Reinforced Eye Ends Of Parabolic Leaf Spring Ishan Aggarwal1 , Gian Bhushan2 , Pankaj Chandna3
[15] Effect Of Assembly Stresses On Fatigue Life Of Symmetrical 65si7 Leaf Springs Vinkel Kumar Arora,1 Gian Bhushan,2 And M. L. Aggarwal
[16] The Finite Element Method And Applications In Engineering Using Ansys®

How to Cite This Article:
Rajasri Bandi, Dr.P.Snehalatha .LEAF SPRING EYE THICKNESS OPTIMIZATION USING SOLID WORKS AND ANSYS PERFORMANCE ANALYSIS . ijetms;7(3):44-54. DOI: 10.46647/ijetms.2023.v07i03.006