International Journal of Engineering Technology and Management Sciences

2023, Volume 7 Issue 4

EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF GEOPOLYMER RCC BEAMS USING BOTTOM ASH

AUTHOR(S)

Arish Pandi, Udaya Kumar, Riya Nunu, Ajay, Ms.J.S Minimol

DOI: https://doi.org/10.46647/ijetms.2023.v07i04.037

ABSTRACT
Bottom ash is formed in coal furnaces. It is made from agglomerated ash particles that too large to be carried in the flue gases and fall through open grates to an ash hopper at the bottom of the furnace. Bottom ash is mainly comprised of fused coarser particles. These particles are quite porous and look like volcanic lava. Bottom ash forms up to 25% of the total ash while the fly ash is remaining 75%. The present work deals with flexural behavior of bottom ash geopolymer reinforced concrete beam. A total of six beams were cast, in which three beams were control reinforced concrete beams and thee beams were bottom ash geopolymer reinforced concrete beam. bottom ash geopolymer reinforced concrete beamwas cured at ambient temperature. The load carrying capacity, load deflection behavior and initial stiffness capacity of beams were arrived and compared with control reinforced cement concrete (RCC) specimens

Page No: 270 - 274

References:

1. Aggarwal, P., Aggarwal, Y., and Gupta, S.M., Effect of bottom ash as replacement of fine aggregates in concrete, Asian Journal of Civil Engineering (Building and Housing), Vol.8, No.1 (2007) 49-62.
  2. Bai, Yun., Ibrahim, Ratiyah., and Basheer, P.A.Muhammed., Properties of light weight concrete manufactured with fly ash, furnace bottom ash, and lytag.International Workshop on Sustainable Development and Concrete Technology.
3. Davidovits J. Geopolymers: Man-Made Geosynthesis and the Resulting Development of Very Early High Strength Cement, Journal of Materials Education, 16 (1994) 91-139.
  4. C. Sreenivasulu, J.Guru Jawahar, M.Vijaya Sekhar Reddy and D.Pavan Kumar,”Effect of Fine aggregate Blending on short-term mechanical properties of geo polymer concrete, Asian Journal of Civil Engineering (BHRC), Volume-17,Issue-5(2016),PP-537-550.
  5. C.Sreenivasulu, A.Ramakrishnaiah, and J.Guru Jawahar, Mechanical properties of geo polymer concrete using granite slurry as sand replacement, Intenational Jornal of Advances in Engineering and Technology,April-2015, Volume-8,Issue-2,PP-83-91
6. Shaishav R. Viradiya1, Tarak P. Vora “Comparative study of experimental and analytical results of FRP strengthened beams in flexure”, IJRET: International Journal of Research in Engineering and Technology Volume- 3, Issue- 4, April -2014, PP. 555-559.
  7. Santhakumar. R and Chandrasekaran” Analysis of Retrofitted Reinforced Concrete Shear Beams using Carbon Fiber Composites”, Electronic Journal of Structural Engineering, 4 (2004), PP. 66-74. 8. Lavate. R.S, Patil. A. T, Patil A. M, Hargude. N.V, “Dynamic Response Analysis of Fiber Reinforced Composite Beam”, IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) ISSN: 2278-1684, PP: 38-47.
9. B. V. Rangan (2008) “Fly ash-based geopolymer Concrete”, Research Report GC 4, Faculty of Engineering, Curtin University of Technology, Perth, Australia.
10. Dattateraya J K, Rajamane N P, Sabitha D, Ambity P S, Nataraja M C, (2011) “ Flexural Behaviour of Reinforced Geopolymer Concrete Beams ’’, International Journal of Civil Structural Engineering, Vol. 2, Issue 1, PP.138-159.
  11. D.Hardjito and B.V.Rangan (2005) “Development and properties of lowcalcium fly ash-based geopolymer concrete” Research Report GC1, Faculty of Engineering, Curtin University of Technology, Perth, Australia.
  12. Omran H.Y, Zangeneh.P and EL-Hacha. R, “Finite element modelling of steel-concrete composite beams strengthened with prestressed CFRP plate” International institute for FRP, December- 2009, PP. 187-192.
13. Jayalin.D, Prince Arulraj.G, Karthika.V: “Analysis of composite beams using Ansys”, IJERT: International Journal of Research in Engineering and Technology Volume-4, Issue-9, Aug-2015, PP-11-15.
14. IS: 10262-2009.Concrete Mix Proportioning Guidelines, Bureau of Indian Standards, New Delhi, India.
  15. IS 456:2000. Plain and Reinforced Concrete – Code of Practice.
16. IS: 1199-1959.Indian Standards methods of sampling and analysis of concrete, Bureau of Indian Standards, New Delhi, India.
17. IS: 516-1959.Indian standard code of practice methods of test for strength of concrete, Bureau of Indian Standards, New Delhi, India.
18. IS: 1489 – 1 (1991) .Specifications for portlandpozzolona cement, Part 1: Flyash based, Bureau of Indian Standards, New Delhi, India. 19. IS: 383-1970.Specifications for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi, India.


How to Cite This Article:
Arish Pandi, Udaya Kumar, Riya Nunu, Ajay, Ms.J.S Minimol . EXPERIMENTAL STUDY ON FLEXURAL BEHAVIOR OF GEOPOLYMER RCC BEAMS USING BOTTOM ASH . ijetms;7(4):270-274. DOI: 10.46647/ijetms.2023.v07i04.037